Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Phenolic Resinoid 2215 Resinoid Engineering Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2215 |
---|---|---|---|
Impact strength of cantilever beam gap | -- | ISO 180/2A | 3.7 kJ/m² |
-- | ASTM D256A | 37 J/m |
Electrical performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2215 |
---|---|---|---|
dielectric strength | -- | IEC 60243-1 | 8.7 kV/mm |
-- | ASTM D149 | 7.9 kV/mm | |
arc resistance | ASTM D495 | 100 sec |
Mechanical properties | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2215 |
---|---|---|---|
bending strength | -- | ASTM D790 | 79.3 MPa |
compressive strength | ASTMD695 | 179 MPa | |
Flexural modulus | -- | ISO 178 | 9700 MPa |
bending strength | -- | ISO 178 | 79.0 MPa |
tensile strength | 屈服 | ASTM D638 | 48.3 MPa |
屈服 | ISO 527-2 | 48.0 MPa | |
Flexural modulus | -- | ASTM D790 | 9650 MPa |
flammability | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2215 |
---|---|---|---|
UL flame retardant rating | 6.4mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2215 |
---|---|---|---|
density | ASTMD792A | 1.45 g/cm³ | |
Water absorption rate | 24hr | ASTM D570 | 0.50 % |
23°C,24hr | ISO 62 | 0.50 % |
Thermal performance | Test Condition | Test Method | Resinoid Engineering Corporation/Resinoid 2215 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTMD648 | 199 °C |
Contact Us
Get App
Top