PBT+ASA PBT + ASA A 4212/507 MR/GF12
0
- Properties:Fillerglass mineral12%filler by weight
- Usages:Fasteners
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | ISO 1133 | 20.0 cm³/10min | |
| Shrinkage rate | ISO 294-4 | 0.60to0.90 % | |
| ISO 294-4 | 0.70to1.0 % | ||
| density | ISO 1183 | 1.29 g/cm³ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3100 MPa | |
| tensile strength | ISO 527-2 | 50.0 MPa | |
| Tensile strain | Break | ISO 527-2 | 4.0 % |
| Flexural modulus | ISO 178 | 2900 MPa | |
| bending strength | ISO 178 | 85.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 30 kJ/m² | |
| ISO 179/1eU | 20 kJ/m² | ||
| Charpy Notched Impact Strength | ISO 179/1eA | 4.0 kJ/m² | |
| ISO 179/1eA | 3.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 95.0 °C | |
| vicat | ISO 306/B50 | 123 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top