Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT+ASA PBT + ASA A 4212/507 MR/GF12 ALBIS PLASTIC GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ALBIS PLASTIC GmbH/PBT + ASA A 4212/507 MR/GF12 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -40°C | ISO 179/1eU | 20 kJ/m² |
| Charpy Notched Impact Strength | -- | ISO 179/1eA | 4.0 kJ/m² |
| -40°C | ISO 179/1eA | 3.0 kJ/m² | |
| Impact strength of simply supported beam without notch | -- | ISO 179/1eU | 30 kJ/m² |
| Mechanical properties | Test Condition | Test Method | ALBIS PLASTIC GmbH/PBT + ASA A 4212/507 MR/GF12 |
|---|---|---|---|
| tensile strength | ISO 527-2 | 50.0 MPa | |
| Tensile modulus | ISO 527-2 | 3100 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | 4.0 % |
| Flexural modulus | ISO 178 | 2900 MPa | |
| bending strength | ISO 178 | 85.0 MPa |
| physical property | Test Condition | Test Method | ALBIS PLASTIC GmbH/PBT + ASA A 4212/507 MR/GF12 |
|---|---|---|---|
| Shrinkage rate | MD:24小时 | ISO 294-4 | 0.70to1.0 % |
| Melt volume flow rate | 260°C/2.16kg | ISO 1133 | 20.0 cm³/10min |
| Shrinkage rate | TD:24小时 | ISO 294-4 | 0.60to0.90 % |
| density | ISO 1183 | 1.29 g/cm³ |
| Thermal performance | Test Condition | Test Method | ALBIS PLASTIC GmbH/PBT + ASA A 4212/507 MR/GF12 |
|---|---|---|---|
| vicat | ISO 306/B50 | 123 °C | |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 95.0 °C |
Contact Us
Get App
Top