Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.26到1.30 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO868 | 84到88 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ISO4589-2 | 26到29 % |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Resistance Against Saponification | | HD22.10S1 | <200 mgKOH/g |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | 32.4到39.6 MPa |
| Tensile strain | Break | ISO527-2 | 580到700 % |
| abrasion resistance | | DIN53516 | 37.0到47.0 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | DIN53515 | 77.0到87.0 kN/m |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of ultimate elongation | | UL1581 | <-30 % |
| Change rate of ultimate elongation | | UL1581 | <-30 % |
| Change rate of tensile strength in air | | UL1581 | <-30 % |
| Change rate of ultimate elongation in air | | UL1581 | <-30 % |
| Change rate of tensile strength | | UL1581 | <-30 % |
| Change rate of tensile strength | | UL1581 | <-30 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | >5.0E+13 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO458 | -43.0到-39.0 °C |
| thermal stability | | ISOR182 | >80 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare