PEK RTP 2201 A
0
- Properties:Fillerglass fiber reinforced material10%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.41 g/cm³ | |
| Shrinkage rate | ASTM D955 | 0.40 % | |
| water content | 0.10 % |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Primary Additive | 15 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Yield | ASTM D638 | 3.0 % |
| Flexural modulus | ASTM D790 | 6210 MPa | |
| bending strength | ASTM D790 | 207 MPa | |
| Tensile modulus | ASTM D638 | 8270 MPa | |
| tensile strength | ASTM D638 | 138 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 59 J/m | |
| Suspended wall beam without notch impact strength | ASTM D4812 | 530 J/m |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top