Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEK RTP 2201 A RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | RTP US/RTP 2201 A |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 3.20mm | ASTM D4812 | 530 J/m |
| Impact strength of cantilever beam gap | 3.20mm | ASTM D256 | 59 J/m |
| Supplementary Information | Test Condition | Test Method | RTP US/RTP 2201 A |
|---|---|---|---|
| Primary Additive | 15 % |
| Mechanical properties | Test Condition | Test Method | RTP US/RTP 2201 A |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 3.0 % |
| tensile strength | ASTM D638 | 138 MPa | |
| Flexural modulus | ASTM D790 | 6210 MPa | |
| Tensile modulus | ASTM D638 | 8270 MPa | |
| bending strength | ASTM D790 | 207 MPa |
| flammability | Test Condition | Test Method | RTP US/RTP 2201 A |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | RTP US/RTP 2201 A |
|---|---|---|---|
| Shrinkage rate | MD：3.20mm | ASTM D955 | 0.40 % |
| water content | 0.10 % | ||
| density | ASTM D792 | 1.41 g/cm³ |
Contact Us
Get App
Top