PA12 Latigray 82-03 CW/96 F3
0
- Properties:Fillermetal96%filler by weight
- Usages:Non specific food applicationsmedicaland nursing supplies
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 10.9 g/cm³ | |
| Shrinkage rate | ISO294-4 | 0.50to0.90 % | |
| ISO294-4 | 0.50to0.90 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile stress | ISO527-2/5 | 40.0 MPa | |
| Tensile strain | ISO527-2/5 | 0.80 % | |
| Tensile modulus | ISO527-2/1 | 8900 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179/1eA | 7.0 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 10 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | ASTMD257 | 1E+02 ohms | |
| Volume resistivity | ASTMD257 | 1E+03 ohms·cm | |
| ElectromagneticReflection-Bekiscan-CP | 95 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ISO75-2/B | 160 °C | ||
| ISO75-2/A | 105 °C | ||
| vicat | ISO306/B50 | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top