Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.04 g/cm³ |
| Water absorption rate | | ISO62 | 0.70 % |
| Water absorption rate | | ISO62 | 1.2 % |
| | ISO1133 | 15 g/10min |
| | ISO62 | 2.9 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shaw Brothers D | | ISO868 | 77 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| elongation at break | | ISO527-2 | >=100 % |
| elongation at break | | ISO527-2 | 4.1 % |
| Tensile modulus | | ISO527-2 | - MPa |
| Tensile creep modulus | | ISO899-1 | 2270 MPa |
| Tensile creep modulus | | ISO899-1 | - MPa |
| bending strength | | ISO178 | 67.0 MPa |
| bending strength | | ISO178 | 75.0 MPa |
| Flexural modulus | | ISO178 | 2100 MPa |
| Flexural modulus | | ISO178 | 2300 MPa |
| Charpy Notched Impact Strength | | ISO179/1eA | 17 kJ/m² |
| Charpy Notched Impact Strength | | ISOR527 | 2600 MPa |
| Charpy Notched Impact Strength | | ISO179/Af | 12 kJ/m² |
| tensile strength | | ISO527-2 | 51.5 MPa |
| tensile strength | | ISO527-2 | 50.0 MPa |
| Flame retardant performance | Test Condition | Test Method | Test Result |
|---|
| fire rating | | UL-94 | - HB |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| | IEC60093 | 6E+15 Ω.cm |
| Surface Resistivity | | IEC60093 | 2.5E+16 Ω.cm |
| Dielectric Strength | | IEC60243-1 | 36.0 KV/mm |
| Dissipation Factor | | IEC60250 | 0.025 |
| Dissipation Factor | | IEC60250 | 0.017 |
| Dissipation Factor | | IEC60250 | 0.032 1kHz |
| Dissipation Factor | | IEC60112 | >=600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/Af | 80.0 °C |
| | ISO11359-2 | 1.1E-04 cm/cm／°C |
| | ISO75-2/Bf | 160 °C |
| vicat | | ISO306/A50 | 165 °C |
| vicat | | ISO306/B50 | 225 °C |
| vicat | Melting Temperature | ISO11357-3 | 255 °C |
| | ISO11359-2 | 6.5E-05 cm/cm／°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare