PA+PPO(PPE) Infino HT-8200G

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
Shrinkage rate		ISO 2577	0.50to0.61 %
Shrinkage rate	Shrinkage rate		ISO 2577	0.40to0.49 %
density		ASTM D792	1.24 g/cm³
density	density		ISO 1183	1.24 g/cm³
melt mass-flow rate		ASTM D1238	20 g/10min
melt mass-flow rate	melt mass-flow rate		ISO 1133	20 g/10min
Shrinkage rate		ASTM D955	0.40to0.49 %
Shrinkage rate	Shrinkage rate		ASTM D955	0.50to0.61 %

hardness	Test Condition	Test Method	Test Result
Rockwell hardness	R-Scale	ASTM D785	117
Rockwell hardness	Rockwell hardness	R-Scale	ISO 2039-2	117

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	10 kJ/m²
Impact strength of cantilever beam gap		ASTM D256	88 J/m
	Impact strength of cantilever beam gap		ASTM D256	69 J/m
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ISO 180/1A	10 kJ/m²

Mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		ASTM D638	8400 MPa
Tensile modulus	Tensile modulus		ISO 527-2/50	8800 MPa
tensile strength	Yield	ASTM D638	140 MPa
Flexural modulus		ISO 178	11000 MPa
bending strength		ASTM D790	240 MPa
bending strength	bending strength		ISO 178	210 MPa
Flexural modulus		ASTM D790	5900 MPa
tensile strength	Yield	ISO 527-2/50	159 MPa
	tensile strength	Break	ASTM D638	140 MPa
	tensile strength	tensile strength	Break	ISO 527-2/50	160 MPa
elongation	Break	ASTM D638	3.0 %
Tensile strain	Break	ISO 527-2/50	3.0 %

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ASTM D648	250 °C
	Heat distortion temperature		ISO 75-2/B	254 °C
		Heat distortion temperature		ASTM D648	231 °C
		Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	234 °C
vicat		ISO 306/B50	248 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top