TPU-Capro IROGRAN® A 95 K 4640 HUNTSMAN USA
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | 5.00to10.0 cm³/10min | ||
| Shrinkage rate | ASTM D972 | 0.80 % | |
| density | ASTM D792 | 1.19 g/cm³ | |
| DIN 53479 | 1.19 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 95 | |
| DIN 53505 | 45 | ||
| ASTM D2240 | 45 | ||
| DIN 53505 | 95 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D412 | 6.69 MPa | |
| DIN 53504 | 7.00 MPa | ||
| wear resistance | ASTM D395 | 29 mm³ | |
| DIN 53516 | 30 mm³ |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| compression set | DIN 53517 | 25 % | |
| DIN 53517 | 38 % | ||
| ASTM D395 | 14 % | ||
| ASTM D395 | 25 % | ||
| ASTM D395 | 33 % | ||
| ASTM D395 | 38 % | ||
| DIN 53517 | 14 % | ||
| DIN 53517 | 23 % | ||
| tear strength | DIN 53515 | 90 kN/m | |
| tensile strength | ASTM D412 | 8.62 MPa | |
| DIN 53504 | 9.00 MPa | ||
| ASTM D412 | 10.8 MPa | ||
| DIN 53504 | 11.5 MPa | ||
| ASTM D412 | 14.0 MPa | ||
| DIN 53504 | 14.2 MPa | ||
| ASTM D412 | 18.9 MPa | ||
| DIN 53504 | 20.4 MPa | ||
| Break | ASTM D412 | 37.2 MPa | |
| Break | DIN 53504 | 53.0 MPa | |
| elongation | Break | ASTM D412 | 570 % |
| Break | DIN 53504 | 530 % | |
| tear strength | ASTM D624 | 126 kN/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | DIN 53372 | 165 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top