AS(SAN) KIBISAN® PN-107L125
802
- Properties:transparentHigh transparencyInjection moldingoneDry the material at 75-80twoThe temperature of the inthreeThe injection pressure iscm<sup>2<sup>fourMaintain a pressure of 40cm<sup>2<sup>fiveBack pressure is 5-15kgcm<sup>2<sup>sixThe mold temperature is bsevenDo not leave the hot melt
- Usages:chipcontainerHousehold goodsFood containersseal potCosmetics boxesetc
- Certificates:ULMSDS
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 5.0 g/10min | |
| Melt volume flow rate | ISO 1133 | 58.0 cm3/10min | |
| Shrinkage rate | ISO 294-4 | 0.20-0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 83 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 3450 Mpa | |
| ISO 178 | 2600 Mpa | ||
| bending strength | ASTM D790 | 88.3 Mpa | |
| ISO 178 | 89.0 Mpa | ||
| tensile strength | ASTM D638 | 60.7 Mpa | |
| ISO 527-2/50 | 65.0 Mpa | ||
| ISO 527-2/50 | 65.0 Mpa | ||
| elongation | ASTM D638 | 5.0 % | |
| Tensile strain | ISO 527-2/50 | 4.0 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 99.0 °C | |
| vicat | ASTM D15256 | 104 °C | |
| ISO 306/A50 | 104 °C | ||
| ISO 306/B50 | 101 °C | ||
| Linear coefficient of thermal expansion | ISO 11359-2 | 3.6E-5to3.8E-5 cm/cm/°C | |
| Heat distortion temperature | ASTM D648 | 100 °C | |
| ASTM D648 | 90 °C | ||
| ISO 75-2/A | 88.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top