transparent、High transparency、Injection molding、one、Dry the material at 75-80、two、The temperature of the in、three、The injection pressure is、cm<sup>2<、sup>、four、Maintain a pressure of 40、cm<sup>2<、sup>、five、Back pressure is 5-15kg、cm<sup>2<、sup>、six、The mold temperature is b、seven、Do not leave the hot melt

MSDS

Plastic Datasheets

Thermal Properties	Test Condition	Test Method	TAIWAN CHIMEI/PN-107L125
Linear thermal expansion coefficient	MD	ISO11359-2	3.6E-5to3.8E-5 cm/cm/°C
Heat Deflection Temperature	Unannealed	ASTMD648	90 °C
Vicat Softening Temperature	--	ISO306/B50	101 °C
Vicat Softening Temperature			ASTMD15256	104 °C
Heat Deflection Temperature	1.8MPa,退火	ISO75-2/A	99.0 °C
Heat Deflection Temperature		1.8MPa,未退火	ISO75-2/A	88.0 °C
Vicat Softening Temperature	--	ISO306/A50	104 °C
Heat Deflection Temperature	Annealed	ASTMD648	100 °C

Hardness	Test Condition	Test Method	TAIWAN CHIMEI/PN-107L125
Rockwell Hardness	M级	ASTMD785	83

Mechanical Properties	Test Condition	Test Method	TAIWAN CHIMEI/PN-107L125
Flexural Modulus		ISO178	2600 Mpa
Tensile Stress	断裂	ISO527-2/50	65.0 Mpa
Tensile Stress		屈服	ISO527-2/50	65.0 Mpa
Tensile Elongation	断裂	ASTMD638	5.0 %
Flexural Modulus		ASTMD790	3450 Mpa
Flexural Strength		ASTMD790	88.3 Mpa
Tensile Strain	断裂	ISO527-2/50	4.0 %
Flexural Stress		ISO178	89.0 Mpa
Tensile Strength	屈服	ASTMD638	60.7 Mpa

Physical	Test Condition	Test Method	TAIWAN CHIMEI/PN-107L125
Modeling Shrinkage		ISO294-4	0.20to0.70 %
Melt Volume flow Rate	220°C/10.0kg	ISO1133	58.0 cm3/10min
Melt Mass-Flow Rate	200°C/5.0kg	ASTMD1238	5.0 g/10min

Flammability	Test Condition	Test Method	TAIWAN CHIMEI/PN-107L125
Flame Rating	1.5mm	UL94	HB

Get App

Top