POM Iupital™  F30-03

52
  • Properties:
    High mobility
    Thermal stability
    wear resistant
    High rigidity
    High impact resistance
    currency
  • Usages:
    Thin walled products

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
Shrinkage rate2.0 %
Water absorption rateISO 620.22 %
densityISO 11831.41 g/cm³
melt mass-flow rateISO 113327 g/10min
Melt volume flow rateISO 113323.0 cm3/10min
flammabilityTest ConditionTest MethodTest Result
UL flame retardant ratingUL 94HB
Mechanical propertiesTest ConditionTest MethodTest Result
Tensile modulusISO 527-22900 Mpa
tensile strength ISO 527-264.0 Mpa
Tensile strainISO 527-27.5 %
Nominal tensile fracture strainISO 527-225 %
Flexural modulusISO 1782700 Mpa
bending strengthISO 17891.0 Mpa
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 1796.0 kJ/m²
Impact strength of simply supported beam without notchISO 179150 kJ/m²
Electrical performanceTest ConditionTest MethodTest Result
relative permittivityIEC 602503.90
Dissipation FactorIEC 602502E-03
Dissipation FactorIEC 602507E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Surface ResistivityIEC 600931E+16 ohms
Volume resistivityIEC 600931E+14 ohms·cm
dielectric strengthIEC 60243-132 KV/mm
dielectric strengthIEC 60243-119 KV/mm
relative permittivityIEC 602503.90
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureISO 75-2/B156 °C
Heat distortion temperatureISO 75-2/A100 °C
melting temperatureISO 11357-3166 °C
Linear coefficient of thermal expansionISO 11359-21.1E-04 cm/cm/°C
Linear coefficient of thermal expansionISO 11359-21.1E-04 cm/cm/°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top