Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.06 g/cm³ |
| Shrinkage rate | | ISO294-4 | 1.6 % |
| Shrinkage rate | | ISO294-4 | 1.6 % |
| Water absorption rate | | ISO62 | 1.2 % |
| Water absorption rate | | ISO62 | 0.50 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| UL flame retardant rating | | UL94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ISO Shortcut | | ISO1874 | PA12-HI,EHZ,22-010 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | 42.0 MPa |
| Tensile stress | Break | ISO527-2 | 36.0 MPa |
| Tensile strain | Yield | ISO527-2 | 9.0 % |
| Tensile strain | Break | ISO527-2 | 44 % |
| Tensile modulus | | ISO527-2 | 1500 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179/1eA | 9.0 kJ/m² |
| Charpy Notched Impact Strength | | ISO179/1eA | 21 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 无断裂 |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC60093 | 1E+03 ohms·cm |
| InsulationResistance | | IEC60167 | 1E+03 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 130 °C |
| | ISO75-2/A | 60.0 °C |
| vicat | | ISO306/A | 175 °C |
| vicat | | ISO306/B | 140 °C |
| melting temperature | | ISO11357-3 | 178 °C |
| | ISO11359-2 | 1.5E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare