Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 VESTAMID® L L-R3-EI Altuglas International of Arkema Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C,完全断裂 | ISO 179/1eA | 21 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| 23°C | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | -30°C,完全断裂 | ISO 179/1eA | 9.0 kJ/m² |
| Supplementary Information | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| ISO Shortcut | ISO 1874 | PA12-HI.EHZ.22-010 |
| Mechanical properties | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| tensile strength | 断裂 | ISO 527-2 | 36.0 MPa |
| Tensile strain | 断裂 | ISO 527-2 | 44 % |
| Tensile modulus | ISO 527-2 | 1500 MPa | |
| Tensile strain | 屈服 | ISO 527-2 | 9.0 % |
| tensile strength | 屈服 | ISO 527-2 | 42.0 MPa |
| Electrical performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| Volume resistivity | IEC 60093 | 1E+03 ohms·cm | |
| insulation resistance | IEC 60167 | 1E+03 ohms |
| flammability | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.06 g/cm³ |
| Shrinkage rate | TD | ISO 294-4 | 1.6 % |
| MD | ISO 294-4 | 1.6 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.50 % |
| 饱和,23°C | ISO 62 | 1.2 % |
| Thermal performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L-R3-EI |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 178 °C | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 1.5E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 130 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 60.0 °C | |
| vicat | -- | ISO 306/B | 140 °C |
| -- | ISO 306/A | 175 °C |
Contact Us
Get App
Top