Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.21 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.80 % |
| Water absorption rate | | ASTMD570 | 0.26 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTMD785 | 123 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| transmissivity | | ASTMD1003 | 87.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTMD790 | 2100 MPa |
| bending strength | | ASTMD790 | 82.0 MPa |
| compressive strength | | ASTMD695 | 81.0 MPa |
| tensile strength | | ASTMD638 | 69.0 MPa |
| elongation | Break | ASTMD638 | 65 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 260 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | 2E+16 ohms·cm |
| dielectric strength | | ASTMD149 | 31 kV/mm |
| dielectric constant | | ASTMD150 | 3.00 |
| Dissipation Factor | | ASTMD150 | 0.010 |
| arc resistance | | ASTMD495 | 127 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 175 °C |
| | ASTMD696 | 6.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare