TPU NX-95A
9
- Properties:high strengthwear resistantenhance
- Usages:Bottle capFiber gradeFootwearparts
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 内部方法 | 0.50to0.80 % | |
| density | ASTMD792 | 1.53 g/cm³ | |
| Shrinkage rate | 内部方法 | 0.30to0.70 % | |
| 内部方法 | 0.30to0.80 % | ||
| Specific volume | ASTMD792 | 0.660 cm³/g | |
| Shrinkage rate | 内部方法 | 0.40to0.60 % | |
| 内部方法 | 0.30to0.50 % | ||
| Water absorption rate | ISO62 | 0.080 % | |
| Shrinkage rate | 内部方法 | 0.50to1.0 % | |
| Water absorption rate | ASTMD570 | 0.090 % | |
| Shrinkage rate | 内部方法 | 0.60to0.90 % | |
| melt mass-flow rate | ISO1133 | 17 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Unscented Izod Impact Strength 12 | ISO180/1U | 45 kJ/m² | |
| Simply supported beam without notch impact strength 11 | ISO179/1eU | 45 kJ/m² | |
| Impact strength of simply supported beam gap 11 | ISO179/1eA | 5.0 kJ/m² | |
| Suspended wall beam gap impact strength 12 | ISO180/1A | 8.0 kJ/m² | |
| Simply supported beam without notch impact strength 11 | ISO179/1eU | 45 kJ/m² | |
| Suspended wall beam gap impact strength 12 | ISO180/1A | 7.0 kJ/m² | |
| Impact strength of simply supported beam gap 11 | ISO179/1eA | 5.0 kJ/m² | |
| Impact strength of cantilever beam gap | ASTMD256 | 80 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength 7 | ASTMD638 | 120 Mpa | |
| Tensile modulus | ISO527-2/1 | 9300 Mpa | |
| Tensile strain 7 | ASTMD638 | 2.7 % | |
| Flexural Strength8 | ASTMD790 | 195 Mpa | |
| ASTMD790 | 190 Mpa | ||
| Bending strength 9,10 | ISO178 | 195 Mpa | |
| Bending modulus 9 | ISO178 | 8500 Mpa | |
| Tensile strain | ISO527-2/5 | 2.0 % | |
| ASTMD1044 | 19.0 mg | ||
| Tensile strength 7 | ASTMD638 | 120 Mpa | |
| Tensile modulus 6 | ASTMD638 | 9300 Mpa | |
| Tensile strain 7 | ASTMD638 | 2.7 % | |
| Tensile stress | ISO527-2/5 | 125 Mpa | |
| Bending modulus 8 | ASTMD790 | 7580 Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top