PC PANLITE® MN-8030Q
23
- Properties:UV resistanceFlame retardant
- Usages:Lighting applicationsAutomotive External Parts
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt volume flow rate | ISO 1133 | 11.0 cm3/10min | |
| Shrinkage rate | 内部方法 | 0.70-1.0 % | |
| 内部方法 | 0.70-1.0 % | ||
| Water absorption rate | ISO 62 | 0.22 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2300 Mpa | |
| tensile strength | ISO 527-2/50 | 62.0 Mpa | |
| ISO 527-2/50 | 56.0 Mpa | ||
| Tensile strain | ISO 527-2/50 | 4.0 % | |
| ISO 527-2/50 | 110 % | ||
| Flexural modulus | ISO 178 | 2250 Mpa | |
| bending strength | ISO 178 | 92.0 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | NoBreak |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+15 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 123 °C | |
| ISO 75-2/A | 104 °C | ||
| Linear coefficient of thermal expansion | ISO 11359-2 | 8E-05 cm/cm/°C | |
| ISO 11359-2 | 8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top