EHMWPE Quadrant EPP TIVAR® SuperPlus
0
- Properties:Supplementary information
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| limiting pv value | 内部方法 | 0.0701 MPa·m/s | |
| bending strength | Yield | ASTM D790 | 21.4 MPa |
| Compression Modulus | ASTM D695 | 414 MPa | |
| compressive strength | ASTM D695 | 20.7 MPa | |
| coefficient of friction | Steel - Static | 内部方法 | 0.15 |
| Impact strength of cantilever beam gap | ASTM D256A | 无断裂 | |
| density | ASTM D792 | 0.960 g/cm³ | |
| Water absorption rate | ASTM D570 | <0.010 % | |
| Saturation | ASTM D570 | <0.010 % | |
| Heat distortion temperature | ASTM D648 | 46.7 °C | |
| Dissipation Factor | ASTM D150 | 5E-04 | |
| UL flame retardant rating | UL 94 | HB | |
| Shore hardness | ASTM D2240 | 70 | |
| Tensile modulus | ASTM D638 | 703 MPa | |
| tensile strength | Ultimate | ASTM D638 | 36.5 MPa |
| elongation | Break | ASTM D638 | 300 % |
| Flexural modulus | ASTM D790 | 586 MPa | |
| Maximum operating temperature LongTerm, Air | 104 °C | ||
| Crystallization peak temperature | ASTM D3418 | 135 °C | |
| Linear coefficient of thermal expansion | ASTME831 | 2.2E-04 cm/cm/°C | |
| thermal conductivity | 0.41 W/m/K | ||
| Surface Resistivity | ASTM D257 | >1.0E+15 ohms | |
| dielectric strength | ASTM D149 | 91 kV/mm | |
| dielectric constant | ASTM D150 | 2.30 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top