HDPE Alathon® M5363
144
- Properties:Compressive crackHigh impact resistanceEasy to processLow odorNarrow molecular weight d
- Usages:chipcovercontainerBarrelAutomotive sector
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Apparent density | ASTM D1895 | 0.53to0.59 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 6.5 g/10min | |
| spiral flow length | 内部方法 | 22.6 CM |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 70 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 1030 Mpa | |
| ASTM D638 | 809 Mpa | ||
| tensile strength | ASTM D638 | 28.1 Mpa | |
| ASTM D638 | 24.1 Mpa | ||
| Tensile strain | ASTM D638 | 8.5 % | |
| ASTM D638 | 1500 % | ||
| Flexural modulus | ASTM D790 | 1440 Mpa | |
| ASTM D790 | 1290 Mpa | ||
| ASTM D790 | 1070 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | ASTM D4812 | NoBreak |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 74.0 °C | |
| brittle temperature | ASTM D746 | <-76.0 °C | |
| vicat | ASTM D1525 | 126 °C | |
| melting temperature | ASTM D3418 | 130 °C | |
| Crystallization peak temperature | ASTM D3418 | 117 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top