Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | | 0.51 g/cm³ |
| density | | | 0.660 |
| density | | | 1.03 g/cm³ |
| density | | ASTM D792 | 1.07 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 73 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Toxic gas emissions - Flaming&Non Flaming | | | Pass |
| flammability | | FAR25.853 | Pass |
| Smoke density | | FAR25.853 | Pass |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | Break | ASTM D790 | 46.2 MPa |
| Tensile modulus | | ASTM D638 | 1880 MPa |
| tensile strength | Yield | ASTM D638 | 26.9 MPa |
| tensile strength | Break | ASTM D638 | 31.7 MPa |
| elongation | Yield | ASTM D638 | 3.0 % |
| elongation | Break | ASTM D638 | 20 % |
| Flexural modulus | | ASTM D790 | 1460 MPa |
| bending strength | Yield | ASTM D790 | 40.7 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 49 J/m |
| Suspended wall beam without notch impact strength | | ASTM D256 | 370 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 194 °C |
| Heat distortion temperature | | ASTM D648 | 70.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare