Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Unspecified DuraForm® FR 100 3D Systems
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 3D Systems/DuraForm® FR 100 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C,3.18mm | ASTM D256 | 370 J/m |
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 49 J/m |
| hardness | Test Condition | Test Method | 3D Systems/DuraForm® FR 100 |
|---|---|---|---|
| Shore hardness | 邵氏D | ASTM D2240 | 73 |
| Mechanical properties | Test Condition | Test Method | 3D Systems/DuraForm® FR 100 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 20 % |
| 屈服 | ASTM D638 | 3.0 % | |
| bending strength | 屈服 | ASTM D790 | 40.7 MPa |
| 断裂 | ASTM D790 | 46.2 MPa | |
| Tensile modulus | ASTM D638 | 1880 MPa | |
| tensile strength | 断裂 | ASTM D638 | 31.7 MPa |
| Flexural modulus | ASTM D790 | 1460 MPa | |
| tensile strength | 屈服 | ASTM D638 | 26.9 MPa |
| flammability | Test Condition | Test Method | 3D Systems/DuraForm® FR 100 |
|---|---|---|---|
| flammability | 1.50mm | FAR25.853 | Pass |
| Smoke density | 1.60mm | FAR25.853 | Pass |
| Toxic gas emissions - Flaming&Non Flaming | 1.60mm | Pass | |
| UL flame retardant rating | 1.7mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | 3D Systems/DuraForm® FR 100 |
|---|---|---|---|
| density | --2 | 1.03 g/cm³ | |
| TapDensity3 | 0.660 | ||
| -- | ASTM D792 | 1.07 g/cm³ | |
| 表观密度3 | 0.51 g/cm³ |
| Thermal performance | Test Condition | Test Method | 3D Systems/DuraForm® FR 100 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 70.0 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 194 °C |
Contact Us
Get App
Top