ABS GF20 IM
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.19 g/cm3 | |
| Shrinkage rate | ASTM D-955 | 0.20 % | |
| Water absorption rate | ASTM D-570 | 0.30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D-638 | 77.9 MPa | |
| elongation at break | ASTM D-638 | 11 % | |
| Flexural modulus | ASTM D-790 | 5650 MPa | |
| bending strength | ASTM D-790 | 119 MPa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 112 J/m | |
| Suspended wall beam without notch impact strength | ASTM D-256 | 400 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+16 Ohm.cm | |
| dielectric strength | ASTM D-149 | 18 Kv/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D-648 | 112 ℃ | |
| ASTM D-648 | 106 ℃ | ||
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000040 cm/cm/℃ | |
| UL flame retardant rating | UL 94 | HB |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top