Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS GF20 IM USA TPC
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Electrical performance | Test Condition | Test Method | USA TPC/GF20 IM |
|---|---|---|---|
| Volume resistivity | ASTM D-257 | 1E+16 Ohm.cm | |
| dielectric strength | ASTM D-149 | 18 Kv/mm |
| Mechanical properties | Test Condition | Test Method | USA TPC/GF20 IM |
|---|---|---|---|
| tensile strength | 屈服 | ASTM D-638 | 77.9 MPa |
| Impact strength of cantilever beam gap | 6.35mm | ASTM D-256 | 112 J/m |
| Suspended wall beam without notch impact strength | 6.35mm | ASTM D-256 | 400 J/m |
| bending strength | ASTM D-790 | 119 MPa | |
| elongation at break | ASTM D-638 | 11 % | |
| Flexural modulus | ASTM D-790 | 5650 MPa |
| physical property | Test Condition | Test Method | USA TPC/GF20 IM |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D-570 | 0.30 % |
| density | ASTM D-792 | 1.19 g/cm3 | |
| Shrinkage rate | Flow(3.18mm) | ASTM D-955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | USA TPC/GF20 IM |
|---|---|---|---|
| Linear coefficient of thermal expansion | Flow | ASTM D-696 | 0.000040 cm/cm/℃ |
| Heat distortion temperature | 0.45MPa，未退火，HDT | ASTM D-648 | 112 ℃ |
| 1.80MPa，未退火，HDT | ASTM D-648 | 106 ℃ | |
| UL flame retardant rating | 1.50mm | UL 94 | HB |
Contact Us
Get App
Top