ABS ABS P2HE ELIX Polymers, S. L.

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityISO 11831.04 g/cm³
Melt volume flow rateISO 11337.00 cm³/10min
Shrinkage rateISO 294-40.40to0.70 %
Shrinkage rateISO 294-40.40to0.70 %
hardnessTest ConditionTest MethodTest Result
ball-indentation hardnessISO 2039-1110 MPa
flammabilityTest ConditionTest MethodTest Result
burning rateISO 379545 mm/min
UL flame retardant ratingUL 94HB
Burning wire flammability indexIEC 60695-2-12700 °C
Mechanical propertiesTest ConditionTest MethodTest Result
Tensile modulusISO 527-2/12500 MPa
tensile strength ISO 527-2/5044.0 MPa
bending strengthISO 17870.0 MPa
Tensile strainISO 527-2/502.4 %
Tensile strainISO 527-2/50>15 %
Flexural modulusISO 1782400 MPa
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 179/1eA11 kJ/m²
Charpy Notched Impact StrengthISO 179/1eA19 kJ/m²
Impact strength of simply supported beam without notchISO 179/1eU90 kJ/m²
Impact strength of simply supported beam without notchISO 179/1eU160 kJ/m²
Impact strength of cantilever beam gapISO 180/1A10 kJ/m²
Impact strength of cantilever beam gapISO 180/1A19 kJ/m²
Electrical performanceTest ConditionTest MethodTest Result
relative permittivityIEC 602503.00
relative permittivityIEC 602502.90
Dissipation FactorIEC 602505E-03
Dissipation FactorIEC 602508E-03
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 0
Surface ResistivityIEC 600931E+15 ohms
Volume resistivityIEC 600931E+15 ohms·cm
dielectric strengthIEC 60243-137 kV/mm
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureISO 75-2/B100 °C
Heat distortion temperatureISO 75-2/A96.0 °C
vicatISO 306/B5099.0 °C
Linear coefficient of thermal expansionISO 11359-29E-05 cm/cm/°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top