Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS ABS P2HE ELIX Polymers, S. L.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodELIX Polymers, S. L./ABS P2HE
Charpy Notched Impact Strength23°CISO 179/1eA19 kJ/m²
-30°CISO 179/1eA11 kJ/m²
Impact strength of cantilever beam gap-30°CISO 180/1A10 kJ/m²
Impact strength of simply supported beam without notch23°CISO 179/1eU160 kJ/m²
Impact strength of cantilever beam gap23°CISO 180/1A19 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU90 kJ/m²
hardnessTest ConditionTest MethodELIX Polymers, S. L./ABS P2HE
ball-indentation hardnessISO 2039-1110 MPa
Electrical performanceTest ConditionTest MethodELIX Polymers, S. L./ABS P2HE
Volume resistivityIEC 600931E+15 ohms·cm
dielectric strength23°C,1.00mmIEC 60243-137 kV/mm
relative permittivity23°C,1MHzIEC 602502.90
23°C,100HzIEC 602503.00
Compared to the Leakage Tracking Index (CTI)解决方案AIEC 60112PLC 0
Surface ResistivityIEC 600931E+15 ohms
Dissipation Factor23°C,100HzIEC 602505E-03
23°C,1MHzIEC 602508E-03
Mechanical propertiesTest ConditionTest MethodELIX Polymers, S. L./ABS P2HE
tensile strength 屈服,23°CISO 527-2/5044.0 MPa
Flexural modulus23°CISO 1782400 MPa
Tensile strain屈服,23°CISO 527-2/502.4 %
断裂,23°CISO 527-2/50>15 %
Tensile modulus23°CISO 527-2/12500 MPa
bending strength23°CISO 17870.0 MPa
flammabilityTest ConditionTest MethodELIX Polymers, S. L./ABS P2HE
burning rate2.00mmISO 379545 mm/min
Burning wire flammability index2.0mmIEC 60695-2-12700 °C
UL flame retardant rating1.6mmUL 94HB
physical property Test ConditionTest MethodELIX Polymers, S. L./ABS P2HE
Melt volume flow rate220°C/10.0kgISO 11337.00 cm³/10min
Shrinkage rateTDISO 294-40.40to0.70 %
MDISO 294-40.40to0.70 %
densityISO 11831.04 g/cm³
Thermal performanceTest ConditionTest MethodELIX Polymers, S. L./ABS P2HE
Linear coefficient of thermal expansionMD:23到55°CISO 11359-29E-05 cm/cm/°C
Heat distortion temperature1.8MPa,退火,HDTISO 75-2/A96.0 °C
vicatISO 306/B5099.0 °C
Heat distortion temperature0.45MPa,退火,HDTISO 75-2/B100 °C

Contact Us

Get App

Top