Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO294-4 | 0.010 % |
| Outdoor applicability | | UL746C | f1 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Compression Molded | ASTMD638 | 48.3 MPa |
| Flexural modulus | Compression Molded | ASTMD790 | 10300 MPa |
| bending strength | Compression Molded | ASTMD790 | 124 MPa |
| compressive strength | | ASTMD695 | 165 MPa |
| Poisson's ratio | | | 0.30 |
| Tensile modulus | Compression Molded | ASTMD638 | 11700 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTMD256 | 530 J/m |
| Suspended wall beam without notch impact strength | Compression Molded | ASTMD4812 | 800 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| arc resistance | | ASTMD495 | 180 sec |
| dielectric strength | | ASTMD149 | 15 kV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | | 2.5E-05 cm/cm/°C |
| | | 3.5E-05 cm/cm/°C |
| thermal conductivity | | | 0.30 W/m/K |
| RTI Elec | | UL746 | 130 °C |
| RTI Imp | | UL746 | 130 °C |
| RTI Str | | UL746 | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare