PC Iupilon® MB5002R

0

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
densityISO 11831.20 g/cm³
melt mass-flow rateISO 113310 g/10min
Melt volume flow rateISO 11339.20 cm³/10min
Shrinkage rate0.60to0.80 %
Shrinkage rate0.60to0.80 %
Water absorption rateISO 620.20 %
Mechanical propertiesTest ConditionTest MethodTest Result
tensile strength YieldISO 527-250.0 MPa
Tensile strainYieldISO 527-25.9 %
Nominal tensile fracture strainISO 527-2140 %
Flexural modulusISO 1782000 MPa
bending strengthISO 17878.0 MPa
Tensile modulusISO 527-22100 MPa
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 17980 kJ/m²
Impact strength of simply supported beam without notchISO 179NoBreak
Electrical performanceTest ConditionTest MethodTest Result
Dissipation FactorIEC 602500.023
Surface ResistivityIEC 600937E+11 ohms
Volume resistivityIEC 600933E+13 ohms·cm
dielectric strengthIEC 60243-124 kV/mm
dielectric strengthIEC 60243-118 kV/mm
relative permittivityIEC 602504.40
relative permittivityIEC 602503.50
Dissipation FactorIEC 602508.1E-03
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureISO 75-2/B132 °C
Heat distortion temperatureISO 75-2/A112 °C
Linear coefficient of thermal expansionISO 11359-28E-05 cm/cm/°C
Linear coefficient of thermal expansionISO 11359-29.6E-05 cm/cm/°C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top