BOC INFUSE™ 9010
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.877 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 0.50 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 77 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | Compression Molded | ASTM D638 | 3.40 MPa |
| tensile strength | ASTM D638 | 13.2 MPa | |
| elongation | ASTM D638 | >750 % |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ASTM D412 | 770 % |
| tear strength | ASTM D624 | 47.8 kN/m | |
| compression set | ASTM D395 | 24 % | |
| ASTM D395 | 67 % | ||
| tensile strength | Break | ASTM D412 | 14.5 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | 内部方法 | 122 °C | |
| TMA | 内部方法 | 121 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top