Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
BOC INFUSE™ 9010 DOW USA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DOW USA/INFUSE™ 9010 |
|---|---|---|---|
| Shore hardness | 邵氏A,模压成型 | ASTM D2240 | 77 |
| Mechanical properties | Test Condition | Test Method | DOW USA/INFUSE™ 9010 |
|---|---|---|---|
| Tensile modulus | 模压成型 | ASTM D638 | 3.40 MPa |
| elongation | 断裂,模压成型 | ASTM D638 | >750 % |
| tensile strength | 断裂,模压成型 | ASTM D638 | 13.2 MPa |
| elastomer | Test Condition | Test Method | DOW USA/INFUSE™ 9010 |
|---|---|---|---|
| elongation | 断裂 | ASTM D412 | 770 % |
| tensile strength | 断裂 | ASTM D412 | 14.5 MPa |
| compression set | 70°C | ASTM D395 | 67 % |
| tear strength | ASTM D624 | 47.8 kN/m | |
| compression set | 21°C | ASTM D395 | 24 % |
| physical property | Test Condition | Test Method | DOW USA/INFUSE™ 9010 |
|---|---|---|---|
| density | ASTM D792 | 0.877 g/cm³ | |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.50 g/10min |
| Thermal performance | Test Condition | Test Method | DOW USA/INFUSE™ 9010 |
|---|---|---|---|
| melting temperature | 内部方法 | 122 °C | |
| TMA | 1.00mm | 内部方法 | 121 °C |
Contact Us
Get App
Top