Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.80到1.90 g/cm³ |
| Tightening rate | | ASTMD1895 | 1.0 |
| Shrinkage rate | | ASTMD955 | 0.050到0.30 % |
| Water absorption rate | | ASTMD570 | 0.14 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 35到45 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 31.0到37.9 MPa |
| Flexural modulus | | ASTMD790 | 8960到11000 MPa |
| bending strength | | ASTMD790 | 89.6到110 MPa |
| Compression Modulus | | ASTMD695 | 359000到379000 MPa |
| compressive strength | | ASTMD695 | 117到131 MPa |
| shear strength | | ASTMD732 | 41.4到48.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 210到320 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric strength | | ASTMD149 | >13 kV/mm |
| arc resistance | | ASTMD495 | >185 sec |
| Inclined-PlaneTracking | | ASTMD2303 | >1000 min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | >260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare