PA66 G3000HR INVISTA USA

Form：Granules | Grade：Injection grade

Properties:

Hydrolysis resistanceDimensional stabilityGlass fiber reinforcedThermal stabilityFiller: Glass fiber reinfGood dimensional stabilitHigh tensile strengthHydrolysis resistancethermal stabilityGood demolding performanc30% filler by weight

Typical Applications:

Automotive sectorElectronic fieldElectrical field

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electronic field \| Electrical field
Properties:	Hydrolysis resistance \| Dimensional stability \| Glass fiber reinforced \| Thermal stability \| Filler: Glass fiber reinf \| Good dimensional stabilit \| High tensile strength \| Hydrolysis resistance \| thermal stability \| Good demolding performanc \| 30% filler by weight

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	270	Mpa
Bending modulus		ISO 178	9100	Mpa
Tensile strain	Break	ISO 527-2	3.1	%
tensile strength	Break	ISO 527-2	195	Mpa
Tensile modulus		ISO 527-2	9800	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180	10	kJ/m²
Charpy Notched Impact Strength	23℃	ISO 179	10	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-40℃	ISO 179	9.0	kJ/m²
bending strength		ISO 178	270	Mpa
Bending modulus		ISO 178	9100	Mpa
Elongation at Break		ISO 527	3.1	%
tensile strength	Break	ISO 527	195	Mpa
Tensile modulus		ISO 527	9800	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 11357-3	262	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	248	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	255	°C
Melting temperature	10 ℃/min	ISO 11357	262	°C
Hot deformation temperature	1.82 MPa, Unannealed	ISO 75	248	°C
Hot deformation temperature	Hot deformation temperature	0.45 MPa, Unannealed	ISO 75	255	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	TD: 2.00 mm	ISO 294-4	0.95-1.05	%
Shrinkage rate	Shrinkage rate	MD: 2.00 mm	ISO 294-4	0.30-0.40	%
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	1.8	%
Water absorption rate	Water absorption rate	23°C,24hr	ISO 62	1.2	%
Shrinkage rate	MD:2.00mm	ISO 294-4	0.30-0.40	%
Shrinkage rate	Shrinkage rate	TD:2.00mm	ISO 294-4	0.95-1.1	%
Water absorption rate	Equilibrium, 23℃, 50% RH	ISO 62	1.8	%
Water absorption rate	Water absorption rate	23℃, 24 hr	ISO 62	1.2	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top