PA66/C/PTFE LNP™ LUBRICOMP™ RCL-4036 BK8115
99
- Properties:Low temperature impact reThermal stability
- Usages:Electronic and Electrical ApplicationsAutomotive components
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ASTMD955 | 0.10 % | |
| ASTMD955 | 0.70 % | ||
| ISO294-4 | 0.72 % | ||
| ISO294-4 | 0.11 % | ||
| Water absorption rate | ASTMD570 | 0.53 % | |
| ISO62 | 0.84 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD3702Modified | 0.36 | ||
| ASTMD3702Modified | 0.30 | ||
| Wear factor - Washer | ASTMD3702Modified | 15.0 10^-10in^5-min/ft-lb-hr | |
| Tensile modulus | ASTMD638 | 32400 Mpa | |
| ISO527-2/1 | 22600 Mpa | ||
| tensile strength | ASTMD638 | 182 Mpa | |
| Tensile stress | ISO527-2 | 245 Mpa | |
| elongation | ASTMD638 | 0.90 % | |
| Tensile strain | ISO527-2 | 1.8 % | |
| Flexural modulus | ASTMD790 | 18400 Mpa | |
| ISO178 | 22700 Mpa | ||
| bending strength | ASTMD790 | 373 Mpa | |
| Bending stress | ISO178 | 396 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam gap impact strength 3 | ISO180/1A | 11 kJ/m² | |
| UnnotchedIzodImpactStrength3 | ISO180/1U | 69 kJ/m² | |
| Dart impact equipped with measuring instruments | ASTMD3763 | 10.2 J | |
| Multi axis Instrumented Impact Energy | ISO6603-2 | 3.91 J |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 255 °C | ||
| Hot deformation temperature 4 | ISO75-2/Af | >240 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top