Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66/C/PTFE RCL-4036 BK8115 SABIC INNOVATIVE US
LNP™ LUBRICOMP™
Electronic and Electrical、Automotive components
Low temperature impact re、Thermal stability
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/RCL-4036 BK8115 |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 69 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 3.91 J | |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 11 kJ/m² |
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 10.2 J |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/RCL-4036 BK8115 |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 22600 Mpa | |
| bending strength | ASTM D790 | 373 Mpa | |
| Wear factor | Washer | ASTM D3702Modified | 15.0 10^-10in^5-min/ft-lb-hr |
| tensile strength | 断裂 | ASTM D638 | 182 Mpa |
| 断裂 | ISO 527-2 | 245 Mpa | |
| Flexural modulus | ASTM D790 | 18400 Mpa | |
| Tensile modulus | ASTM D638 | 32400 Mpa | |
| elongation | 断裂 | ASTM D638 | 0.90 % |
| coefficient of friction | Static | ASTM D3702Modified | 0.30 |
| bending strength | ISO 178 | 396 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 1.8 % |
| Flexural modulus | ISO 178 | 22700 Mpa | |
| coefficient of friction | Dynamic | ASTM D3702Modified | 0.36 |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/RCL-4036 BK8115 |
|---|---|---|---|
| Shrinkage rate | MD:24小时 | ISO 294-4 | 0.11 % |
| MD：24小时 | ASTM D955 | 0.10 % | |
| Water absorption rate | 24hr,50%RH | ASTM D570 | 0.53 % |
| 平衡,23°C,50%RH | ISO 62 | 0.84 % | |
| Shrinkage rate | TD：24hr | ASTM D955 | 0.70 % |
| TD:24小时 | ISO 294-4 | 0.72 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/RCL-4036 BK8115 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火,64.0mm跨距，HDT | ISO 75-2/Af | >240 °C |
| 1.8MPa,未退火,3.20mm，HDT | ASTM D648 | 255 °C |
Contact Us
Get App
Top