Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.06 g/cm³ |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| IonicContent | | 内部方法 | 40.0 ng/g |
| IonicContent | | 内部方法 | 1.00 ng/g |
| IonicContent | | 内部方法 | 25.0 ng/g |
| IonicContent | | 内部方法 | 5.00 ng/g |
| Outgassing | | 内部方法 | <0.0300 µg/g |
| Outgassing | | 内部方法 | <0.0200 µg/g |
| IonicContent | | 内部方法 | 85.0 ng/g |
| IonicContent | | 内部方法 | 3.00 ng/g |
| Outgassing | | 内部方法 | <0.0200 µg/g |
| Outgassing | | 内部方法 | 1.50 µg/g |
| Outgassing | | 内部方法 | IDP |
| IonicContent | | 内部方法 | 15.0 ng/g |
| IonicContent | | 内部方法 | 3.00 ng/g |
| IonicContent | | 内部方法 | 15.0 ng/g |
| IonicContent | | 内部方法 | 60.0 ng/g |
| IonicContent | | 内部方法 | 10.0 ng/g |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D790 | 1830 MPa |
| Tensile modulus | | ASTM D638 | 1860 MPa |
| tensile strength | Break | ASTM D638 | 40.1 MPa |
| elongation | Break | ASTM D638 | 40 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 110 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 2E+10 ohms·cm |
| StaticDecay | | CPM | <2.0 sec |
| Volume resistivity | | ESDS11.11 | 1E+09 ohms |
| Surface Resistivity | | ASTM D257 | 1E+10 ohms/sq |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 68.9 °C |
| Heat distortion temperature | | ASTM D648 | 58.9 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare