Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

BOC Stat-Rite® S-403 Lubrizol Advanced Materials, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Stat-Rite® S-403 |
---|---|---|---|
Impact strength of cantilever beam gap | ASTM D256 | 110 J/m |
Supplementary Information | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Stat-Rite® S-403 |
---|---|---|---|
IonicContent | Cation:Li+ | 内部方法 | 40.0 ng/g |
Outgassing | TotalOrganics | 内部方法 | 1.50 µg/g |
IonicContent | Cation:Mg+ | 内部方法 | 1.00 ng/g |
Outgassing | MMA | 内部方法 | <0.0300 µg/g |
IonicContent | Anion:SO4-1 | 内部方法 | 10.0 ng/g |
Cation:Ca+ | 内部方法 | 85.0 ng/g | |
Anion:PO4-1 | 内部方法 | 60.0 ng/g | |
Outgassing | 填充物 | 内部方法 | IDP |
IonicContent | Anion:Cl-1 | 内部方法 | 15.0 ng/g |
Cation:NH4+ | 内部方法 | 5.00 ng/g | |
Anion:F-1 | 内部方法 | 3.00 ng/g | |
Outgassing | Toluene | 内部方法 | <0.0200 µg/g |
IonicContent | Cation:Na+ | 内部方法 | 25.0 ng/g |
Anion:NO3-1 | 内部方法 | 15.0 ng/g | |
Outgassing | Styrene | 内部方法 | <0.0200 µg/g |
IonicContent | Cation:K+ | 内部方法 | 3.00 ng/g |
Mechanical properties | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Stat-Rite® S-403 |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 40 % |
Flexural modulus | ASTM D790 | 1830 MPa | |
Tensile modulus | ASTM D638 | 1860 MPa | |
tensile strength | 断裂 | ASTM D638 | 40.1 MPa |
Electrical performance | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Stat-Rite® S-403 |
---|---|---|---|
Volume resistivity | ASTM D257 | 2E+10 ohms·cm | |
StaticDecay | CPM | <2.0 sec | |
Surface Resistivity | ASTM D257 | 1E+10 ohms/sq | |
Volume resistivity | ESDS11.11 | 1E+09 ohms |
physical property | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Stat-Rite® S-403 |
---|---|---|---|
density | ASTM D792 | 1.06 g/cm³ |
Thermal performance | Test Condition | Test Method | Lubrizol Advanced Materials, Inc./Stat-Rite® S-403 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 58.9 °C |
0.45MPa,未退火,HDT | ASTM D648 | 68.9 °C |
Contact Us
Get App
Top