TSC

TSC 1M Hong Kong Huayi

Properties:
Before injecting high transparency TSC-M material thoroughly clean the machine with GPPS (especially if the machine has produced transparent ABS transparent HIPS Yajiali SAN material etc.) to ensure that there are no residual materials in the barrel that affect the maximum transparency of TSC-M
Compare

Technical Data Sheet

Other performance	Test Method	Test Result
Impact strength of cantilever beam gap	ASTM D-256	7.5 kg.cm/cm
turbidity	ASTM D-1003	1.2
Transmittance rate	ASTM D-1003	92% 1/8"

mechanical properties	Test Method	Test Result
Elongation at Break	ASTM D-638	85 %
tensile strength	ASTM D-638	35 MPa
Bending modulus	ASTM D-790	1678 MPa
bending strength	ASTM D-790	50 MPa

thermal performance	Test Condition	Test Method	Test Result
melt mass-flow rate		ASTM D-1238	6 g/10min
Hot deformation temperature	HDT	ASTM D-648	73 ℃
Vicat softening temperature		ASTM D-1525	90 ℃

Physical properties	Test Condition	Test Method	Test Result
density		ASTM D-792	1.03
Shore hardness			72 Shore D

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top