PA6 Novamid® ES110C DSM Additive Manufacturing

Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	1.13 g/cm³
Shrinkage rate		ISO 294-4	1.3 %
Shrinkage rate	Shrinkage rate		ISO 294-4	1.1 %
Water absorption rate		ISO 62	2.8 %
viscosity number		ISO 307	118 cm³/g

flammability	Test Condition	Test Method	Test Result
Flammability level		IEC 60695-11-10,-20	V-2
Flammability level	Flammability level		IEC 60695-11-10,-20	V-2

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Yield	ISO 527-2	84.0 MPa
Nominal tensile fracture strain		ISO 527-2	18 %
Flexural modulus		ISO 178	2800 MPa
bending strength		ISO 178	114 MPa
Tensile modulus		ISO 527-2	3300 MPa

Impact resistance	Test Condition	Test Method	Test Result
Charpy Notched Impact Strength		ISO 179/1eA	4.1 kJ/m²
Impact strength of simply supported beam without notch		ISO 179/1eU	无断裂

Thermal performance	Test Condition	Test Method	Test Result
Heat distortion temperature		ISO 75-2/B	173 °C
Heat distortion temperature	Heat distortion temperature		ISO 75-2/A	76.0 °C
melting temperature		ISO 11357-3	220 °C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top