Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 Novamid® ES110C DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DSM Additive Manufacturing/Novamid® ES110C |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 4.1 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Mechanical properties | Test Condition | Test Method | DSM Additive Manufacturing/Novamid® ES110C |
|---|---|---|---|
| Nominal tensile fracture strain | ISO 527-2 | 18 % | |
| Tensile modulus | ISO 527-2 | 3300 MPa | |
| tensile strength | 屈服 | ISO 527-2 | 84.0 MPa |
| Flexural modulus | ISO 178 | 2800 MPa | |
| bending strength | ISO 178 | 114 MPa |
| flammability | Test Condition | Test Method | DSM Additive Manufacturing/Novamid® ES110C |
|---|---|---|---|
| Flammability level | 3.0mm | IEC 60695-11-10,-20 | V-2 |
| 0.8mm | IEC 60695-11-10,-20 | V-2 |
| physical property | Test Condition | Test Method | DSM Additive Manufacturing/Novamid® ES110C |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 1.3 % |
| MD | ISO 294-4 | 1.1 % | |
| viscosity number | ISO 307 | 118 cm³/g | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 2.8 % |
| density | ISO 1183 | 1.13 g/cm³ |
| Thermal performance | Test Condition | Test Method | DSM Additive Manufacturing/Novamid® ES110C |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 220 °C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 173 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 76.0 °C |
Contact Us
Get App
Top