PA66 NYLOY® MG-0033N
0
- Properties:Fillerglass fiber reinforced material33%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | ISO 294-4 | 0.43 % | |
| ISO 294-4 | 1.2 % | ||
| ASTM D955 | 1.2 % | ||
| ASTM D955 | 0.43 % | ||
| density | ISO 1183 | 1.38 g/cm³ | |
| ASTM D792 | 1.18 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | ISO 2039-2 | 115 |
| R-Scale | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | Break | ISO 527-2 | 3.2 % |
| Break | ASTM D638 | 2.0 % | |
| tensile strength | ISO 527-2 | 180 MPa | |
| ASTM D638 | 177 MPa | ||
| bending strength | ISO 178 | 270 MPa | |
| ASTM D790 | 265 MPa | ||
| Flexural modulus | ISO 178 | 8700 MPa | |
| ASTM D790 | 10000 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 160 J/m | |
| Charpy Notched Impact Strength | ISO 179/1eA | 15 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/A | 245 °C | |
| ASTM D648 | 250 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top