Technical Data Sheet
Cured Properties | Test Condition | Test Method | Test Result |
---|
elongation | Break | | 120 % |
tensile strength | | | 6.37 MPa |
Dissipation factor | 1kHz | | 6E-04 |
Volume resistivity | | | 1.8E+15 ohms·cm |
Relative permittivity | 1kHz | | 2.70 |
Dielectric strength | 1.90mm | | 20 kV/mm |
Shore hardness | ShoreA | | 44 |
Uncured Properties | Test Condition | Test Method | Test Result |
---|
MixRatiobyWeight(PBW) | 密度 | | 1.02 g/cm³ |
Curing time | 100°C | | 1.0 hr |
Curing time | 125°C | | 0.75 hr |
MixRatiobyWeight(PBW) | 粘度 | | 4.0 Pa·s |
MixRatiobyWeight(PBW) | PartB | | 1.0 |
MixRatiobyWeight(PBW) | PartA | | 10 |
Curing time | Pot Life(25°C) | | 240 min |
Curing time | 25°C | | 1.4E+2到1.7E+2 hr |
Curing time | 150°C | | 15 hr |
Curing time | 65°C | | 4.0 hr |
optical performance | Test Condition | Test Method | Test Result |
---|
Refractive index | | | 1.406 |
thermal performance | Test Condition | Test Method | Test Result |
---|
Usage temperature | | | -60-240 °C |
thermal conductivity | | | 0.19 W/m/K |
specific heat | | | 1260 J/kg/°C |
Linear coefficient of thermal expansion | MD | | 2.7E-04 cm/cm/°C |
Physical properties | Test Condition | Test Method | Test Result |
---|
Shrinkage rate | MD | | 0.20 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.