ABS/PC CYCOLAC™ DL200H-BK4051
719
- Properties:High heat resistanceHydrolysis resistance
- Usages:Automotive componentsElectronic and electrical components
Technical Data Sheet
physical property | Test Condition | Test Method | Test Result |
---|---|---|---|
melt mass-flow rate | ASTM D1238 | 25 g/10min | |
ISO 1133 | 9.0 g/10min |
Impact resistance | Test Condition | Test Method | Test Result |
---|---|---|---|
Impact strength of cantilever beam gap | ISO 180/1A | 56 kJ/m² | |
Charpy Notched Impact Strength | ISO 179/1eA | 30 kJ/m² | |
ISO 179/1eA | 65 kJ/m² | ||
Impact strength of cantilever beam gap | ISO 180/1A | 21 kJ/m² |
Mechanical properties | Test Condition | Test Method | Test Result |
---|---|---|---|
Tensile modulus | ASTM D638 | 2330 Mpa | |
ISO 527-2/1 | 2350 Mpa | ||
tensile strength | ASTM D638 | 47.0 Mpa | |
ISO 527-2/50 | 49.0 Mpa | ||
ISO 527-2/50 | 40.0 Mpa | ||
Tensile strain | ISO 527-2/50 | 3.9 % | |
elongation | ASTM D638 | 70 % | |
Tensile strain | ISO 527-2/50 | 75 % | |
Flexural modulus | ASTM D790 | 2200 Mpa | |
ISO 178 | 2100 Mpa | ||
bending strength | ISO 178 | 75.0 Mpa | |
ASTM D790 | 77.0 Mpa |
Thermal performance | Test Condition | Test Method | Test Result |
---|---|---|---|
Heat distortion temperature | ASTM D648 | 118 °C | |
ISO 75-2/Bf | 120 °C | ||
ASTM D648 | 96.0 °C | ||
ASTM D648 | 101 °C | ||
ISO 75-2/Af | 96.0 °C | ||
vicat | ISO 306/B50 | 112 °C | |
ISO 306/B120 | 114 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top