TSU-Ether

TSU-Ether InnoTuf® HP-2160A Innovative Polymers, Inc.

Compare

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result
tear strength		ASTM D624	22.8 kN/m
elongation	Break	ASTM D638	150 %
tensile strength		ASTM D638	6.21 MPa
Shore hardness	ShoreA	ASTM D2240	55to65

Uncured Properties	Test Condition	Test Method	Test Result
viscosity	25°C2		0.34 Pa·s
	viscosity	25°C3		1.7 Pa·s
		viscosity	25°C4		3.6 Pa·s
			viscosity	GelTime		10to20 min
			viscosity	viscosity	固化时间(25°C)		1.7E+02 hr

thermosetting	Test Condition	Test Method	Test Result
Thermosetting components	Resin		按重量计算的混合比:100按容量计算的混合比:100
	Thermosetting components	Hardener		按重量计算的混合比:43按容量计算的混合比:46
	Thermosetting components	Thermosetting components	Demold Time(66°C)		180to300 min

Physical properties	Test Condition	Test Method	Test Result
density	Hardener		0.990 g/cm³
	density	Cured		1.02 g/cm³
	density	density	基体Resin		1.08 g/cm³
Shrinkage rate	MD	ASTM D2566	0.20to0.50 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top