PP TechnoFiber PP LGF 40-10-01 HI
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.20 g/cm³ | |
| Shrinkage rate | ISO 294-4 | 0.20 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179/1eU | 58 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 21 kJ/m² | |
| ISO 179/1eA | 20 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 58 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 8700 MPa | |
| tensile strength | Yield | ISO 527-2/50 | 115 MPa |
| Tensile strain | Yield | ISO 527-2/50 | 2.5 % |
| Flexural modulus | ISO 178 | 8900 MPa | |
| bending strength | ISO 178 | 130 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ISO 75-2/B | 160 °C | |
| ISO 75-2/A | 150 °C | ||
| ISO 75-2/C | 124 °C | ||
| melting temperature | ISO 11357-3 | 165 °C | |
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.5E-05 cm/cm/°C | |
| ISO 11359-2 | 3.4E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top