Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | | 1.4to1.8 % |
| Water absorption rate | | ISO 62 | 1.2 % |
| density | | ISO 1183 | 1.14 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | 3250 MPa |
| tensile strength | Yield | ISO 527-2 | 90.0 MPa |
| Tensile strain | Yield | ISO 527-2 | 4.5 % |
| Tensile strain | Break | ISO 527-2 | 15 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO 180/A | 4.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Continuous use temperature | | | 90.0 °C |
| vicat | | ISO 306/A120 | 255 °C |
| ball-indentation hardness | | IEC 60695-10-2 | Pass |
| melting temperature | | DSC | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare