Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 Polimid A SG Y Poliblend S.p.a.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Poliblend S.p.a./Polimid A SG Y |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/A | 4.5 kJ/m² |
| Electrical performance | Test Condition | Test Method | Poliblend S.p.a./Polimid A SG Y |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | Poliblend S.p.a./Polimid A SG Y |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3250 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | 15 % |
| 屈服 | ISO 527-2 | 4.5 % | |
| tensile strength | 屈服 | ISO 527-2 | 90.0 MPa |
| flammability | Test Condition | Test Method | Poliblend S.p.a./Polimid A SG Y |
|---|---|---|---|
| UL flame retardant rating | 3.20mm | UL 94 | HB |
| 0.800mm | UL 94 | HB | |
| 1.60mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Poliblend S.p.a./Polimid A SG Y |
|---|---|---|---|
| Shrinkage rate | 1.4to1.8 % | ||
| Water absorption rate | 23°C,24hr | ISO 62 | 1.2 % |
| density | ISO 1183 | 1.14 g/cm³ |
| Thermal performance | Test Condition | Test Method | Poliblend S.p.a./Polimid A SG Y |
|---|---|---|---|
| vicat | ISO 306/A120 | 255 °C | |
| ball-indentation hardness | 165°C | IEC 60695-10-2 | Pass |
| melting temperature | DSC | 260 °C | |
| Continuous use temperature | 90.0 °C |
Contact Us
Get App
Top