PBT PBT/PC 28
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.22 g/cm³ | |
| Melt volume flow rate | ISO 1133 | 80.0 cm³/10min | |
| Water absorption rate | ISO 62 | 0.30 % | |
| ISO 62 | 0.10 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | 15 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 | |
| Charpy Notched Impact Strength | ISO 179/1eA | 10 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2300 MPa | |
| tensile strength | ISO 527-2/50 | 60.0 MPa | |
| Tensile strain | ISO 527-2/50 | 4.5 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | >1.0E+12 ohms | |
| Volume resistivity | IEC 60093 | >1.0E+17 ohms·cm | |
| dielectric strength | IEC 60243-1 | 25 kV/mm | |
| relative permittivity | IEC 60250 | 3.10 | |
| Dissipation Factor | IEC 60250 | 0.015 | |
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| maximum service temperature | IEC 216 | 110 °C | |
| 130 °C | |||
| Heat distortion temperature | ISO 75-2/B | 129 °C | |
| ISO 75-2/A | 119 °C | ||
| melting temperature | ISO 3146 | 223 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top