Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT PBT/PC 28 Bada AG
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Bada AG/PBT/PC 28 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 15 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | 无断裂 |
| Charpy Notched Impact Strength | -30°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 无断裂 |
| Electrical performance | Test Condition | Test Method | Bada AG/PBT/PC 28 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| dielectric strength | IEC 60243-1 | 25 kV/mm | |
| Volume resistivity | IEC 60093 | >1.0E+17 ohms·cm | |
| relative permittivity | 1MHz | IEC 60250 | 3.10 |
| Surface Resistivity | IEC 60093 | >1.0E+12 ohms | |
| Dissipation Factor | 1MHz | IEC 60250 | 0.015 |
| Mechanical properties | Test Condition | Test Method | Bada AG/PBT/PC 28 |
|---|---|---|---|
| tensile strength | 屈服,23°C | ISO 527-2/50 | 60.0 MPa |
| Tensile strain | 屈服,23°C | ISO 527-2/50 | 4.5 % |
| Tensile modulus | 23°C | ISO 527-2/1 | 2300 MPa |
| physical property | Test Condition | Test Method | Bada AG/PBT/PC 28 |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.22 g/cm³ |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.10 % |
| 饱和,23°C | ISO 62 | 0.30 % | |
| Melt volume flow rate | 250°C/2.16kg | ISO 1133 | 80.0 cm³/10min |
| Thermal performance | Test Condition | Test Method | Bada AG/PBT/PC 28 |
|---|---|---|---|
| maximum service temperature | 20000h | IEC 216 | 110 °C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 129 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 119 °C | |
| maximum service temperature | somehours | 130 °C | |
| melting temperature | ISO 3146 | 223 °C |
Contact Us
Get App
Top