TPU-Est/eth DP R9930 geba Kunststoffcompounds GmbH
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183/A | 1.31 g/cm³ | |
| Shrinkage rate | 0.58 % | ||
| 0.20 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 71 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| wear resistance | ISO 4649 | 102 mm³ | |
| bending strength | ISO 178 | 87.2 MPa | |
| tensile strength | Yield | ISO 527-2/200 | 73.0 MPa |
| Tensile strain | Break | ISO 527-2/200 | 6.0 % |
| Flexural modulus | ISO 178 | 4600 MPa | |
| ISO 178 | 3000 MPa | ||
| bending strength | ISO 178 | 161 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | >8.5 kJ/m² | |
| ISO 179/1eA | >18 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179/1eU | 70 kJ/m² | |
| ISO 179/1eU | >60 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/B50 | 115 °C | |
| Linear coefficient of thermal expansion | DIN 53752-A | 1.4E-05 cm/cm/°C | |
| DIN 53752-A | 1.2E-04 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top