Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPU-Est/eth DP R9930 geba Kunststoffcompounds GmbH
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R9930 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | >18 kJ/m² |
| -30°C | ISO 179/1eA | >8.5 kJ/m² | |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | >60 kJ/m² |
| -30°C | ISO 179/1eU | 70 kJ/m² |
| hardness | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R9930 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 71 |
| Mechanical properties | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R9930 |
|---|---|---|---|
| Flexural modulus | -30°C | ISO 178 | 4600 MPa |
| 23°C | ISO 178 | 3000 MPa | |
| wear resistance | ISO 4649 | 102 mm³ | |
| bending strength | -30°C | ISO 178 | 161 MPa |
| tensile strength | 屈服 | ISO 527-2/200 | 73.0 MPa |
| Tensile strain | 断裂 | ISO 527-2/200 | 6.0 % |
| bending strength | 23°C | ISO 178 | 87.2 MPa |
| physical property | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R9930 |
|---|---|---|---|
| Shrinkage rate | MD | 0.20 % | |
| density | ISO 1183/A | 1.31 g/cm³ | |
| Shrinkage rate | TD | 0.58 % |
| Thermal performance | Test Condition | Test Method | geba Kunststoffcompounds GmbH/DP R9930 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD | DIN 53752-A | 1.4E-05 cm/cm/°C |
| vicat | ISO 306/B50 | 115 °C | |
| Linear coefficient of thermal expansion | TD | DIN 53752-A | 1.2E-04 cm/cm/°C |
Contact Us
Get App
Top